Vanguard OHV V-Twin Repair Manual Page 71

  • Download
  • Add to my manuals
  • Print
  • Page
    / 85
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 70
Vanguard
TM
Twin-Cylinder OHV Liquid-Cooled Engine
Section 5 - Engine Assembly
Page 66
Do Not tighten governor lever nut at this time.
Fig. 168
9. Assemble throttle link and spring to throttle lever
on carburetor, Fig. 169.
Fig. 169
ADJUST GOVERNOR
CAUTION: BEFORE STARTING OR
RUNNING ENGINE, static adjustment of the
governor must be completed! Failure to make
the static adjustments first could result in engine
overspeeding which may result in engine
damage, property damage or personal injury.
Static Governor Adjustment
1. With governor lever nut loose, rotate governor
control swivel clockwise as far as it will go (wide
open throttle) and hold in this position, Fig. 170.
2. Rotate governor shaft counter-clockwise as far it
will go. Torque governor nut to
70 in. lbs. (8.0 Nm).
Fig. 170
INSTALL MUFFLER
1. Install muffler with new gaskets, Fig. 171. Torque
screws to
190 in. lbs. (21.0 Nm).
Fig. 171
Page view 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 84 85

Comments to this Manuals

No comments