Vanguard DigiTMR User Manual download pdf (Page 39)

REV 3 DIGITMR USER’S MANUAL

3.7 Printing Test Results

After a timing test has been performed, the test results can be printed in graphical or tabulated

format on the DigiTMR’s built-in thermal printer.

3.7.1. Printing the Tabulated Test Results

To print the tabulated test results from the last test performed:

a. Start from the “START-UP” menu:

Press the [2] key (GET RSLT) to get the last test results.

b. The following screen will be displayed:

Press the [1] key (PRINT TEST RESULTS).

c. The following screen will be displayed:

Press the [1] key (INTERNAL THERMAL).

d. The following screen will be displayed while the results are being printed:

A typical tabulated test results printout for an OPEN operation is shown in Figure 12.

e. When the printer is done printing, you will be returned to the “START-UP” menu.

BUSY PRINTING

SELECT PRINTER

1. INTERNAL THERMAL

2. DISPLAY RESULTS

1. PRINT TEST RESULTS

2. PLOT FULL CHART

3. PLOT EXPANSION

4. PLOT 0 – 200MS

1. TIME BRKR 04/17/09

2. GET RSLT 10:49:23

3. SET-UP

4. DIAGNOSTICS

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 85 86

No comments

Vanguard DigiTMR User Manual Page 39