Vanguard UPS S2 User Manual

OPERATING PROCEDURES for the UPS-S2 Universal Power Supply Series 2 Vanguard Instruments Co., Inc. 1520 S. Hellman Ave. Ontario, Cali

Operating Procedures UPS-S2 7 5.0 UPS-S2 CABLE CONNECTIONS Always connect the UPS-S2 to the substation ground before connecting any test cables. A

Operating Procedures UPS-S2 86.2 UPS-S2 AC Supply Setting The following steps are recommended for a typical circuit breaker operation: 1. Ground t

Operating Procedures UPS-S2 9 APPENDIX A UPS-S2 Troubleshooting Guide Item Symptom Possible Problem Solution 1 No output. 1. Power Switch i

10 1520 S. Hellman Ave, Ontario, CA 91761, USA Phone: 909-923-9390 Fax: 909-923-9391 www.vanguard-instruments.com

Operating Procedures UPS-S2 SAFETY SUMMARY Follow Exact Operating Procedures Any deviation from the procedures described in this operator’s manua

Operating Procedures UPS-S2 1 TABLE OF CONTENTS Safety Summary 1.0 INTRODUCTION ...

Operating Procedures UPS-S2 21.0 INTRODUCTION 1.1.General Description The Vanguard Universal Power Supply Series 2 (UPS-S2) is designed and produc

Operating Procedures UPS-S2 32.0 UPS-S2 SPECIFICATIONS Table 1 UPS-S2 Specifications MODEL ...

Operating Procedures UPS-S2 43.0 CONTROLS AND INDICATORS 3.1 UPS-S2 Controls & Indicators The UPS-S2 controls and indicators are shown in a pa

Operating Procedures UPS-S2 5Table 2 EZCT™ Controls and Indicators Fig. 1 Index PANEL MARKING FUNCTIONAL DESCRIPTION 1 (No Marking) Input pow

Operating Procedures UPS-S2 64.0 PRETEST SETUP 4.1 Operating Voltages The UPS-S2™ operating voltages are pre-set for 90-130Vac, 50/60Hz or 210-240