Vanguard EZCT-2000 User Manual download pdf (Page 40)

EZCT-2000 USER’S MANUAL REV 3

3.5.3. Printing a Test Plan

To print a test plan:

a. Start from the “START-UP” menu:

Press the [3] key (TEST PLANS).

b. The following screen will be displayed:

Press the [4] key (NEXT PAGE).

c. The following screen will be displayed:

Press the [2] key (PRINT TEST PLAN).

d. The following screen will be displayed:

Type the test plan number that you would like to print and press the

[ENTER] key. If

you do not know the test plan number, you can first print the test plan directory using

the instructions in section 3.5.2.

The test plan will be printed on the thermal printer and you will be returned to the

“START-UP” menu. A typical test plan printout is shown in Figure 11. Test plan elements

are described in Table 4.

PRINT TEST PLAN

NUMBER:

1. EXTRACT TEST PLAN

2. PRINT TEST PLAN

3. ERASE TEST PLAN

1. LOAD TEST PLAN

2. UNLOAD TEST PLAN

3. PLAN DIRECTORY

4. NEXT PAGE

1. RUN TEST 09/24/09

2. SETUP 08:20:19

3. TEST PLANS

4. DIAGNOSTIC

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 67 68

No comments

Vanguard EZCT-2000 User Manual Page 40