Vanguard EZCT-2000 User Manual download pdf (Page 32)

EZCT-2000 USER’S MANUAL REV 3

3.4.3. Printing a Directory of Test Records Stored in the EZCT-2000’s Memory

You can print a directory of all the test records stored in the EZCT-2000’s Flash EEPROM using

the steps below:

a. Start from the “START-UP” menu:

Press the [2] key (SETUP).

b. The following screen will be displayed:

Press the [4] key (NEXT PAGE).

c. The following screen will be displayed:

Press the [1] key (RECORD DIRECTORY).

d. The following screen will be displayed:

Press the [1] key to print a full directory listing of all the test records stored in the EZCT-

2000’s Flash EEPROM. The directory listing will be printed on the thermal printer and

you will be returned to the “START-UP” menu. A sample directory listing printout is

shown in Figure 9.

Press the [2] key to print a short directory listing of the stored test records. The short

directory option prints the last 10 records stored in the EZCT-2000’s Flash EEPROM. The

short directory listing will be printed on the thermal printer and you will be returned to

the “START-UP” menu.

PRINT DIRECTORY

1. FULL DIRECTORY

2. SHORT DIRECTORY

1. RECORD DIRECTORY

2. ERASE RECORD

3. KNEE POINT MARKER

4. NEXT PAGE

1. RECORD ID

2. PRINT RECORD

3. RESTORE RECORD

4. NEXT PAGE

1. RUN TEST 09/24/09

2. SETUP 08:20:19

3. TEST PLANS

4. DIAGNOSTIC

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

No comments

Vanguard EZCT-2000 User Manual Page 32